|Home||» Products||» Water Jet Nozzle||» Water Jet Nozzle|
Waterjet nozzle installation and operationmanual
1: When installing a new nozzle, be sure to usenew orifices. The orifices should be clean and free of dust.
2: Check the position of the orifice installedon the cutting head and the high-pressure connecting rod for indentation. Ifthere is an indentation, it will affect the concentricity.
3: Check the nozzle ferrule for wear and tear,if it is worn, it will affect the concentricity.
4: Install the nozzle as far as possible.
5: The new nozzle rotates the nozzle at anangle of 3-5 days when in use.
6: When the water is found during the cutting,the orifice should be replaced immediately.
7: If the water line is still not verticalafter the above steps, please replace the qualified cutting head (head body).